KS-200A+_SART AIS Transponder
- Product Description
- Specification
- In the Box
- Manuals & Firmware
- Compare All Models
-
FEATURES
The ONWA Class B+ AlS Transponder transmits and receves all data of nearby targets around your boat (with suitable VHF Antenne)
CLASS B+ AIS TECHNOLOGY
SOTDMA Technology
- Same technology used by Class A
- Guaranteed time slot allocation
- 5W Transmission Power - increases the range and AIS Satellite reception enabling Global tracking
- Range - can be seen as far as 10nm to 12nm
- Increased Transmission Rate (based on speed)
SART: If you want to use the Search and Rescue Transponder (SART) function, please connect the corresponding wire (Pin 6 - SART) to the ground (Pin 5, green wire).
An SART alarm button can quickly send out a distress signal in an emergency.exactTrax™
Track fishing boats and small commercial vessels Can send standard AIS message and exactTrax message ONWA AIS can connect other sensors to the AIS module,such as ultrasonic weather sensor and speed log, to sendwith exactTrax message
*NOTE: In order to use exactTrax, user must avail ExactEarth Service

-
PhysicalDimension200mm(length) x 138.7mm(width) x 45.8mm(height)Weight0.45kgPowerInput11 ~ 30VDCPower consumption0.20A nominal
Electrical Interface RS232 38,400 baudrate bi-directionalEnvironmentIEC 60945(Cat C)Operating Temperature-25℃ to +60℃WIFIModeHotspot (default) or WIFI terminalUser nameKS200xx_xxxxxxxxPassword12345678 (default)IP192.168.4.1For KS200A+ and KS200A+_SARTGPS Receiver (AIS Internal)IEC 61108-1 compliant ConnectorsVHF Antenna connector PL259 female
GPS Antenna connector SMA female
NMEA 2000 Interface
VHF TransceiverFrequency161.975 MHz (AIS Channel 1: CH87B) 162.025 MHz (AIS Channel 2: CH88B)Transmitter x 1Receiver x 2Output Power 5WChannel bandwidth 25KHzModulation modes GMSKBit rate 9600 b/s GMSK Rx Sensitivity <-112dBm @20%PERStandards & Compliance- IEC62287-2 (IEC standard, Class B shipborne equipment)- IEC60945 Edn 4.0 (IEC standard, environmental requirements)- ITU-RM.1371-4 (Universal AIS Technical Characteristics)- IEC61162-1 Edn. 2.0 (IEC standard, digital interfaces part 1)- IEC61108-1 (IEC standard, GPS receiver equipment)- IEC61993-2 (IEC standard, Marine navigation equipment)Certifications CE compliant
Compatible Devices
undefined
You May Also Like